TP-Link TL-WR802N Manual

2000-1752-R
Wireless Router
TP Link Model TL-WR802N
Your router comes factory configured to work with
Anritsu instruments.
1. Set the Anritsu handheld instrument
Ethernet settings as follows:
• IP Address = 192.168.0.50
• Default Gateway Address = 0.0.0.0
• Subnet Mask = 255.255.255.0
2. Connect both the Ethernet and USB ports
between the router and instrument.
3. Connect the laptop to the router via Wi-Fi
(generally using the icons in the lower right
system tray) using the SSID and pincode that
are printed on the router label. These codes
are unique for each router. For example:
• SSID = TP-LINK_39DE
• Password = 02850450
4. Open a browser on the computer and enter the
URL address 192.168.0.50 to access the
handheld instrument web interface.
Below is a procedure to recover the factory
configuration.
1. Connect the laptop to the router via Wi-Fi as
described in Step 3 of the previous procedure.
2. Open a web browser and enter the URL
address tplinkwifi.net (or 192.168.0.1 is the
router default IP address, which will be
changed later in the procedure).
3. Log in to the router using the defaults:
• username: admin
• password: admin
4. Click Quick Setup.
5. Set the Router as an Access Point and click
Next until the Quick Setup is done.
6. Review the settings and then reboot the router
using the on-screen Reboot button, then
connect as described in the previous
procedure.
2000-1752-R
Wireless Router
TP Link Model TL-WR802N
Your router comes factory configured to work with
Anritsu instruments.
1. Set the Anritsu handheld instrument
Ethernet settings as follows:
• IP Address = 192.168.0.50
• Default Gateway Address = 0.0.0.0
• Subnet Mask = 255.255.255.0
2. Connect both the Ethernet and USB ports
between the router and instrument.
3. Connect the laptop to the router via Wi-Fi
(generally using the icons in the lower right
system tray) using the SSID and password
that are printed on the router label. These
codes are unique for each router. For example:
• SSID = TP-LINK_39DE
• Password = 02850450
4. Open a browser on the computer and enter the
URL address 192.168.0.50 to access the
handheld instrument web interface.
Below is a procedure to recover the factory
configuration.
1. Connect the laptop to the router via Wi-Fi as
described in Step 3 of the previous procedure.
2. Open a web browser and enter the URL
address tplinkwifi.net (192.168.0.1 or
192.168.0.254 are router default IP addresses,
which will be changed later in the procedure).
3. Log in to the router using the defaults:
• username: admin
• password: admin
4. Click Quick Setup.
5. Set the Router as an Access Point and click
Next until the Quick Setup is done.
6. Review the settings and then reboot the router
using the on-screen Reboot button, then
connect as described in the previous
procedure.
Anritsu utilizes recycled paper
and environmentally conscious
inks and toner.
Anritsu Company
490 Jarvis Drive
Morgan Hill, CA 95037-2809
USA
http://www.anritsu.com
Anritsu utilizes recycled paper
and environmentally conscious
inks and toner.
Anritsu Company
490 Jarvis Drive
Morgan Hill, CA 95037-2809
USA
http://www.anritsu.com

TP-Link TL-WR802N Specifications

General

VPN support	PPTP, L2TP, IPSec
Ethernet LAN	Yes
Cabling technology	10/100Base-T(X)
Networking standards	IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet LAN interface type	Fast Ethernet
Wi-Fi band	Single-band (2.4 GHz)
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Top Wi-Fi standard	Wi-Fi 4 (802.11n)
WLAN data transfer rate (max)	300 Mbit/s
Rack mounting	No
Frequency band	2.4 GHz
Frequency range	2.4 - 2.4835 GHz
USB ports quantity	1
WLAN data transfer rates supported	11, 54, 300 Mbit/s
Security algorithms	128-bit WEP, 152-bit WEP, 64-bit WEP, WPA, WPA-PSK, WPA2, WPA2-PSK
Product type	Tabletop router
Product color	Blue, White
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	10 - 90 %
Certification	CE, FCC, RoHS
Receive power	270M: -65dBm@10% PER , 130M: -70dBm@10% PER , 108M: -82dBm@10% PER , 54M: -73dBm@10% PER , 11M: -82dBm@8% PER , 6M: -86dBm@10% PER , 1M: -90dBm@8% PER dBmW
Transmit power	CE: , \u003C20dBm(2.4GHz) , FCC: , \u003C30dBm dBmW
Mac operating systems supported	macOS
Windows operating systems supported	Windows 2000, Windows 7 Enterprise, Windows 7 Enterprise x64, Windows 7 Home Basic, Windows 7 Home Basic x64, Windows 7 Home Premium, Windows 7 Home Premium x64, Windows 7 Professional, Windows 7 Professional x64, Windows 7 Starter, Windows 7 Starter x64, Windows 7 Ultimate, Windows 7 Ultimate x64, Windows 8, Windows 8 Enterprise, Windows 8 Enterprise x64, Windows 8 Pro, Windows 8 Pro x64, Windows 8 x64, Windows 8.1, Windows 8.1 Enterprise, Windows 8.1 Enterprise x64, Windows 8.1 Pro, Windows 8.1 Pro x64, Windows 8.1 x64, Windows 98SE, Windows NT, Windows Vista Business, Windows Vista Business x64, Windows Vista Enterprise, Windows Vista Enterprise x64, Windows Vista Home Basic, Windows Vista Home Basic x64, Windows Vista Home Premium, Windows Vista Home Premium x64, Windows Vista Ultimate, Windows Vista Ultimate x64, Windows XP Home, Windows XP Home x64, Windows XP Professional, Windows XP Professional x64
WAN connection type	RJ-45
Output current	1 A
Output voltage	5 V
Power source type	DC
Package depth	109 mm
Package width	110 mm
Package height	73.5 mm
Package weight	240 g

Weight and Dimensions

Width	57 mm
Height	18 mm