TL-WR842ND 300Mbps Multi-Function Wireless N Router
- 6 -
2) Use the Factory Default WPS/RESET button: With the Router powered on, use a pin to
press and hold the WPS/RESET button (approximately 8 seconds) until the SYS LED
becomes quick-flash from slow-flash. And then release the button and wait the Router to
reboot to its factory default settings.
¾ WIFI ON/OFF: Press this button to enable or disable Wi-Fi.
¾ Wireless antenna: To receive and transmit the wireless data.
To Next Page
Loading...
