EasyManua.ls Logo

TP-Link TL-WR842ND - Page 23

TP-Link TL-WR842ND
130 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
TL-WR842ND 300Mbps Multi-Function Wireless N Router
- 15 -
Figure 3-11 Find MAC Address
3) If the connection type detected is Static IP, the next screen will appear as shown in Figure
3-12.
Figure 3-12 Quick Setup - Static IP
¾ IP Address - This is the WAN IP address as seen by external users on the Internet
(including your ISP). Your ISP will provide you with the IP address you need to enter
here. Enter the IP address into the field.
¾ Subnet Mask - The Subnet Mask is used for the WAN IP address. Your IPS will provide
you with the subnet mask which is usually 255.255.255.0.
¾ Default Gateway - Your ISP will provide you with the Gateway address which is the ISP
server’s address. Enter the gateway IP address into the box if required.
¾ Primary DNS - Enter the DNS Server IP address into the box if required.

Table of Contents

Other manuals for TP-Link TL-WR842ND

Related product manuals