Quick Installation Guide
300Mbps Wireless N Router
EN020-F5
Connect the Hardware
Connect the modem to the
router’s WAN port with an
Ethernet cable.
Modem
Power adapter
Router
Power adapter
4
Connect the power adapter
to the router.
Turn on the modem and
then wait about 2 minutes
for it to restart.
3
2.A
Confirm that the following
LEDs are solid and on to
verify the hardware
connection is correct.
Power
On
Internet
On
Wi-Fi
On
5
Internet
Turn off the modem and
remove the backup battery if
it has one.
1
If your Internet connection is through an Ethernet cable from the wall
instead of through a DSL / Cable / Satellite modem, connect the
Ethernet cable directly to the router’s WAN port as Step 2B, and then
follow Step 4 and 5 to complete the hardware connection.
Connect the Ethernet cable
directly to the router’s WAN
port.
2.B
TL-WR850N
TL-WR840N
To Next Page
