1. Connect to a Computer
Insert the adapter into a USB port on your computer directly.
Note: Before you proceed, please disable all existing Bluetooth devices (both built-in and third party)
on your computer.
2. Install Bluetooth Driver
1. Download the driver at
https://www.tp-link.com/download-center
2. Unzip the downloaded folder and run Setup.exe.
3. Follow the onscreen instructions to install the driver. During the installation, change Discovery
Mode to Discovery ON.
4. Once the process is finished, restart your computer to complete installation.
Note: If you can’t install the driver successfully, disable the antivirus software and firewall, then
try again
3. Pair With Bluetooth Devices
A. Right-click (Bluetooth) icon on the menu bar and select Add Bluetooth Device.
Notes:
1. Make sure your Bluetooth device is set to be discoverable.
2. If the Bluetooth icon doesn’t appear, refer to FAQ->Q1.
To Next Page
Loading...
