TP-Link WPS510U - Software Installation; Connect Device for Configuration; Configure Wireless Adapter IP; Establish Wireless Connection to Print Server

2
Assign a static IP address to your wireless adapter
Assign the IP address
192.168.0.101 to your wireless
adapter, subnet mask is
255.255.255.0. Please refer to
T1 in Troubleshooting guide
on page 13 if you need assistant
Connect to the print server
Click the icon and select
Connect to a network
Click Refresh
Select WLAN-PS
as your network
Click Connect
Note
For Windows XP, it’s almost the same way as the above to connect your
wireless adapter to the Print Server.