Need help?Do you have a question about the TPI 120 and is the answer not in the manual?
General| DC Current Ranges | 200µA, 2mA, 20mA, 200mA, 10A |
|---|---|
| Diode Test | Yes |
| Continuity Test | Yes |
| Battery Type | 9V |
| DC Voltage Ranges | 200mV, 2V, 20V, 200V |
| AC Voltage Ranges | 200V |
| Resistance Ranges | 200Ω, 2kΩ, 20kΩ, 200kΩ, 2MΩ |
| Voltage Range (AC) | 200V |
| Current Range (DC) | 200µA, 10A |
| Safety Rating | 600V |
Provides essential safety guidelines including 'ALWAYS' and 'NEVER' actions for safe operation.
Highlights key features like safety compliance, large LCD, data hold, rubber boot, and versatility.
Details power supply, battery life, size, weight, and safety ratings like CAT II and CAT III.
Covers DCV, ACV, Resistance (OHM), and Continuity Buzzer measurement details.
Explains the operation of push buttons, rotary switch positions, and input jacks.
Lists standard and optional accessories with their part numbers.
Step-by-step guide for replacing the 9-volt battery when indicated.
Instructions on how to clean the multimeter using mild detergent and a damp cloth.
To Next Page