5.4 Manual Temperature Setting
Manual temperature setting is only available if the temperature sensor is not
plugged in.
An "mm" is added to the Temperature display when the 901-PH is using a manual
Temperature setting. For example…
7.00pH 25.0 7.00pH 25.0
OO
cmcm
1. Switch the 901-PH on and select Temperature mode (see section 2).
2. Measure the temperature of the sample solution.
3. Press the key.
4. The 901-PH now enters manual temperature setting. For example…
Man Temp Man Temp ↑↑ 25.0 25.0↓↓
5. Press the and keys until the display shows the temperature of sample
solution.
6. Press the key to save the manual temperature setting.
Alternatively, press the key to quit and retain the current setting.
To Next Page
Loading...