Hygiene Equipment
Designed for People
32
Cleaning instructions
- Select cleaning interval according to the degree of contamination.
- Contaminations should be removed as soon as possible to prevent material damage.
- Do not clean material with tools which might damage surfaces. Use a towel, sponge, or a soft brush.
- Store the shower chair in dry condition only.
- Use natural, slightly alkaline detergent containing no solvents.
- Do not use products such as trichlorethylene that will damage the surface on seat and backrest.
- Do not use iodine based, disinfectants, this can discolor the surface on seat and backrest.
- Do not use water hotter than 45°C / 113°F
- Avoid excessive friction and abrasive detergents when cleaning as this may damage the surfaces of
the shower chair.
Cleaning process for PUR seat and backrest.
- Lightly brush off loose dirt particles first, then rinse material with clear water.
- Spray on the cleaning product in indicated concentration or apply with a clean towel. Dose the amount
according to degree of contamination.
- Allow the cleaning product to act for 2-5 minutes and wipe off with a towel.
- Rinse off dirt and cleaning product residues thoroughly with cold or lukewarm water to prevent
material discolorations.
- Store the shower trolley only if it is clean and completely dry.
To Next Page
Loading...