Trace Acoustic TA30 - Technical Specifications; Input and Tone Control Specifications; Output and Power Stage Specifications

6
TECHNICAL SPECIFICATIONS
Inputs
Instrument Input Input Impedance = 4Meg Ohm
Sensitivity = 100mV
Tone Controls
Lo-Trim + & - 12 dB @ 150Hz
Hi-Trim + & - 12 dB @ 15kHz
Notch Range = 60 to 300Hz
Attenuation = -18dB
Outputs
Line Output Impedance = 10K Ohms
Nominal signal level = 0dB
Reverb 3 Spring 220mm unit, short decay
Power Stage
Power Output 30 Watts RMS into 8 Ohm internal 8”
speaker and Piezo horn with Dynamic
Correction