Traceable 5004 - Count-Down Memory Recall; Stop Watch Mode; Battery Replacement

2. When the timer counts down to 0:00 00 but not in its timer
mode, the buzzer will sound and the ashing frequency of
corresponding indicator is relatively slower.
3.
When two timers countdown to 0:00 00 at the same time,
the timer which shows on display will sound and the other's
indicator will ash relatively slower.
4.
Press any button to stop timer alarm and the count-up timer.
Count-Down Memory Recall
1. Press the START/STOP button to recall previous timer setting.
Press the START/STOP button again to start the timer.
Stop Watch Mode
1. In timer, mode clear timer by pressing the CLEAR button.
2.
Press the START/STOP button to start the stop watch count-
ing up at 1 second resolution.
3.
Press the START/STOP button to stop counting up.
4.
When the timer counts up to 99H 59M 59S it starts to count
up again from 00H 00M 00S.
Battery Replacement
Use a coin to open the battery cover on the back of the
timer (turn the cover approximately
1
/
8
of a turn counter-
clockwise). Remove exhausted battery, and insert a new
1.5V G-13 size button cell battery (make sure positive '+'
side is facing up and close battery cover.
w ww . . co m
information@itm.com1.800.561.8187