Traceable 5008 User Manual

DESCRIPTION
“HR” button: increase Hours value
“MIN” button: increase Minutes value
“SEC” button: increase Seconds value
“CLEAR” button: reset a timer setting
“CLOCK/TIMER” button: switch between clock and timer
“START/STOP” button: Start, Pause or Stop count up or
count down timer. Memory recall last setting of TIMER 1
TIMER 2 TIMER 3.
Timing Channels
“TIMER 1’’ button: start or stop channel 1.
“TIMER 2” button: start or stop channel 2.
“TIMER 3” button: start or stop channel 3.
Press corresponding channel for channel memory recall.
SPECIFICATIONS
Clock: Displays Hr/Min/Sec (AM/PM)
Count Up Timer: 99 hours, 59 minutes and 59 seconds
Count Down Timer: 99 hours, 59 minutes and 59
seconds. Timer will beep for 1 minute once set time is
reached.
Batteries: 2 x 1.5V lithium batteries
Material: ABS plastic
Dimensions: 8.82 x 6.62 x 1.32 cm, Weight: 90g.
OPERATION
To switch between .”Time/Count Up” and “Count Down”
mode, press the “CLOCK/TIMER” button.
1. In Time/Count Up mode, press the “CLOCK/TIMER”
button for 2 seconds until screen ashes. This
indicates time setting menu has been entered.
2. Press the “HR” button to increase HOURS; press
“MIN” button to increase Minutes and press “SEC”
button to increase Seconds. Continue pressing button
to increase value.
3. Press “CLOCK/TIMER” button to conrm new setting.
COUNT UP TIMER
1. In Time/Count Up mode, press START/STOP button.
Timer will begin counting up. Press START/STOP
button again to pause and press again to continue
counting up.
2. To clear count up time, press START/STOP to stop
timer and then press “CLEAR” button.
HR CLOCK/
TIMER
MIN CLEAR
SEC START/
STOP
w ww. . com
information@itm.com1.800.561.8187

Traceable 5008 Specifications

General

Brand	Traceable
Model	5008
Category	Timer
Language	English

Summary

Timer Functions and Specifications

Button Descriptions

Details the function of each button: HR, MIN, SEC, CLEAR, CLOCK/TIMER, and START/STOP.

Timing Channels

Explains how to start, stop, and recall memory for Timer 1, Timer 2, and Timer 3.

Product Specifications

Lists clock, timer capabilities, dimensions, weight, and materials of the timer.

Count Up Timer Operation

Step-by-step guide to operate the count up timer function, including starting, pausing, and clearing.

Countdown Timer Operation

Countdown Settings

Details on setting hours, minutes, and seconds for three independent countdown channels.

Starting a Countdown

Instructions on initiating and pausing countdown timers for each channel.

Stopping a Countdown

Explains how to stop the timer, clear it, or recall previous settings.

Troubleshooting and Battery Replacement

Operational Difficulties

Addresses potential operational issues and suggests battery replacement as a solution.

Battery Replacement Guide

Provides steps for replacing the battery, including polarity and cover replacement.

Warranty, Service, and Recalibration