Troubleshooting
Problem Solution
Mouse pointer (cursor)
moves erratically
The batteries may be in low power.
Replace the batteries.
Mouse can’t work
properly
Pairing:
1) Plug the nano receiver into the USB
port.
2) Within 10 seconds,press middle and
right keys 3 seconds.
3) low voltage ash 3 seconds and then
go out, it means paring nished.
Maintenance
• Maintaining your product will ensure longer life and will mini-
mize the chance of causing damage to your mouse.
• Keep all beverages away from the mouse area and avoid any
spills.
• Keep the bottom of the mouse clean and free any dust and lm
by wiping off the bottom with just a damp soft cloth.
• Note: these devices are dependent on battery current for opera-
tion. Only alkaline batteries should be used.
• The batteries that ship with these devices are not rechargeable.
Do not try to recharge them.
To Next Page
Loading...