To Next PageTo Next PageHow to open a stuck Tractel Greifzug blocstop BSO BSO?
If the BSO (Brake Safety Override) cannot be opened, it may be due to the BSO holding the load on the safety wire rope or a mechanical defect. To resolve this, try moving the load upwards on the suspension wire rope. If this doesn't work, the BSO may need to be replaced and sent back for repair.
What to do if the Tractel Greifzug blocstop BSO Controller BSO 2050/2360 control pin is not visible?
If the control pin on your Tractel Controller BSO 2050/2360 is not visible after feeding in the safety rope, it could be due to incorrect rope insertion or a mechanical issue. Try pulling the rope out and feeding it back in correctly. If the control pin remains invisible, the BSO may need replacing and should be sent back for repair.
Why is the Tractel Controller equipment activated by normal downwards travel?
If the equipment is activated by normal downwards travel, it may be because the hoisting gear speed is too fast or the activation speed setting is too low. You should check the hoist. The BSO may also need to be changed and sent back for repair.
What to do if the Tractel Greifzug blocstop BSO Controller centrifugal force weight does not turn?
If the centrifugal force weight on your Tractel Controller does not turn, it may be dirty, defective, or iced up. Try changing the BSO and cleaning it, or send it back for repair. If it is iced up, carefully use hot air to heat it up to a maximum of 70°C.
General| Brand | Tractel |
|---|---|
| Model | Greifzug blocstop BSO Series |
| Category | Controller |
| Language | English |
Defines terms and abbreviations utilized throughout the installation and operating manual.
Contact details for the manufacturer, Greifzug Hebezeugbau GmbH, including sales and service office information.
Provides critical safety guidelines for operating the Blocstop™ BSO to prevent severe injuries and malfunctions.
Details how the Blocstop™ BSOs are delivered, as fully assembled items.
Lists the standard and optional items included in the Blocstop™ BSO package.
Describes the Blocstop™ BSO as an independent secondary brake for hoisting gear and load lifting equipment.
Explains how the Blocstop™ monitors load lifting equipment speed and stops downward movement via a friction-actuated connection.
Details the individual parts of the Blocstop™ BSO and their respective functions.
Provides model specifications including load bearing capability and wire rope diameter.
Specifies the type of multi-purpose oil or grease required for lubricating the safety rope.
Describes the EMERGENCY-STOP button for manual activation of the secondary brake in emergencies.
Outlines requirements for securing the Blocstop™ BSO to ensure safe dynamic loading during emergency stops.
Details available Blocstop™ BSO models with different stopping speeds.
Lists essential accessories like original Greifzug wire ropes and securing devices needed for operation.
Lists relevant EU Directives and Standards applicable to the Blocstop™ BSO.
Specifies checks for the suspended assembly, installation site, and the Blocstop™ BSO and its accessories.
Provides step-by-step instructions for fitting the Blocstop™ BSO, mounting the rope, and electrical connections.
Details checks required to ensure the system is ready for operation after installation.
Outlines daily checks, including function tests, to ensure the Blocstop™ BSO is operating correctly.
Provides instructions for operating the Blocstop™ BSO when used with Personnel Aerial Platforms (PAM).
Provides instructions for operating the Blocstop™ BSO when used with Material Aerial Platforms (MAM).
Details actions to take immediately after an emergency stop when using a PAM.
Details actions to take immediately after an emergency stop when using a MAM.
Specifies checks and actions required by a specialist after a problem or emergency stop event.
Lists causes of injury or damage that will void guarantee and liability claims.
Provides instructions and safety warnings for safely dismantling the Blocstop™ BSO.
Guidelines for safe transport and storage of the Blocstop™ BSO to prevent damage.
Identifies personnel authorized to perform maintenance and service work on the Blocstop™ BSO.
Details requirements for annual inspections, extraordinary inspections, and prior-to-use checks.
Details regular maintenance tasks, replacement criteria for ropes, lubrication, and cleaning.
Provides guidance on the correct disposal of the equipment as recyclable material.
Lists common problems, their causes, and recommended clearing actions for the Blocstop™ BSO.
