INTRODUCTION
Congratulations on your purchase of this Traeger Wood Pellet Grill, Model BBQ020.
With proper set-up, operation and maintenance, the Grill will provide you with delicious
food and years of cooking enjoyment.
NOTE: NUMBERS FOLLOWING PART NAMES THROUGHOUT THIS MANUAL REFER TO
THE COMPONENT DIAGRAM.
When you un-box the Grill, make sure you have, and can identify all of the following
parts:
(1) Door handle (9)
(2) Bag of screws and washers included 1/4-20 x .375 bolt (17), .250 lock washer (18), and
.250 flat washer (19).
(3) Drip pan assembly (41).
(4) Porcelain Grill Grate (58).
You will need to complete the assembly which includes:
1) Mounting the handle (9) to the lid assembly (59).
Follow these step by step instructions and you’ll be cooking in no time!
TOOLS SUPPLIED FOR ASSEMBLY
7/16” / 1/2” combo wrench
Record your date of purchase here:_____________________________________________
Record your serial number here:_____________________________________________
To Next Page
Loading...
Need help?
General
