QUICK-START
9. DATA SETTING MODE :
HOLD DOWN ALL 3 BUTTONS to enter data setting mode.
Adjust one setting at a time, then move on to the next one.
<LEFT> = Scroll value.
<MODE> = Move to next data setting screen.
<RIGHT> = Move to next digit in data setting mode.
7. BUTTONS:
8. SCREENS:
Vapor has three screens. Press MODE to toggle between them.
Vapor has 3 screens, press MODE to cycle between screens. Press RIGHT on screen 2 to toggle Ride Time/Stop Watch. Press RIGHT on
screen 3 to toggle Odometer/Accumulated Ride Time. Hold all three buttons to enter data setting mode.
RESET TRIP DATA:
<LEFT> + <MODE> = HOLD TO RESET VALUES FOR:
Max Speed, Distance, Ride Time, Stop Watch, Max Engine
Temperature, and Max RPM.
ORDER OF SETUP MODE:
1. Speed and Distance Format
2. Wheel Size
3. Time Format
4. Time of Day
5. PPR Pulses per Revolution
6. PPR Pulse Change
7. PPR Level 2
8. Temperature Unit of Measure
9. Temperature Indicator
10. Temperature Indicator Danger
11. RPM Shift Indicator
12. RPM Shift Indicator Danger
M/H or KM/H
See MEASURE WHEEL SIZE section
12H or 24H
12:00:00
0.5, 1, or 2
RPM when PPR changes
0.5, 1, or 2
°F or °C
Yellow Indicator
Red Indicator
Yellow Indicator
Red Indicator
SCREEN 1
• Time of Day
• Ambient Air Temperature
• RPM Bar Graph
• Speed (SPD)
• Distance (DST)
SCREEN 2
• Engine Temperature
• RPM Bar Graph
• Stop Watch (TT)
• Ride Time (RT)
• Speed (SPD)
• Revolutions per Minute (RPM)
SCREEN 3
• Maximum Temperature (MAX)
• Accumulated Ride Time (ART)
• Odometer (ODO)
• Maximum Speed (MS)
• Maximum RPM (MR)
LEFT BUTTON
Start stop watch
MODE BUTTON
Switch screens
Hold to edit trip distance
RIGHT BUTTON
Toggle between
screen features
YELLOW
LED
RED
LED
To Next Page
Loading...
Need help?
General