Need help?Do you have a question about the Trail Tech Vapor and is the answer not in the manual?
General| Display Type | LCD |
|---|---|
| Speedometer | Yes |
| Tachometer | Yes |
| Temperature Gauge | Yes |
| Odometer | Yes |
| Backlight | Yes |
| Trip Meter | Yes |
| Clock | Yes |
| RPM Range | 0 to 20, 000 RPM |
| Water Resistance | Yes |
| Mounting Options | Handlebar mount |
| Dimensions | 4.2 x 2.3 x 1.2 inches |
Follow basic precautions for safe operation and to prevent damage.
Instructions for mounting the unit on handlebars and installing RPM/Temperature sensors.
Guidance on mounting the Vapor unit to flat surfaces using screws.
Methods for connecting the Vapor to a 12V system via battery or electrical tap.
Specifics on installing the magnet and sensor for ATV distance data collection.
Guidance on installing sensors and magnets for motorcycle wheel speed measurement.
Details three methods for accurately measuring and setting the wheel circumference.
Explains the importance of Data Setting Mode and lists available configurable parameters.
Steps to set speed units (KM/H or M/H) and clock format (12H/24H).
Instructions for setting the PPR value based on engine type for accurate RPM readings.
Addresses frequently asked questions about unit functionality and sensor issues.
To Next Page
