Vapor Features
Ambient Air Temperature/
Engine Temperature:
Vapor will display ambient or air temperature on Screen 1. If an
optional engine temperature sensor has been installed on the machine,
Vapor will display engine temperature on Screen 2. Screen 3 will
display the maximum engine temperature received by the sensor
since the last reset (see Normal Mode:Reset Single-Ride Data for
details).
Temperature measurements use user defined values to advise when
the engine is getting too hot. Tell Vapor what is too hot in Data Setting
Mode (see Data Setting Mode:Temperature Settings for more detail).
When Temperature reaches Vapor’s High Temp Setting, the left LED
will light steady on, signaling the bike is starting to get too hot.
When Temperature reaches Vapor’s Danger Temp Setting, the right
LED will light steady on, signaling the bike is dangerously hot.
Vapor must be connected to external power or LED’s will not function.
NOTE: Engine temperature data will override shift points.
Vapor says,
“DANGER -
TOO HOT!”
37
To Next Page
Loading...
Need help?
General