Troubleshooting F.A.Q.
Why does nothing work?
The internal battery may be dead, or Vapor is not hooked up to vehicle
power properly. Review installation procedure. Try the reset button
on the back of Vapor. Don’t forget to write down your wheel size and
other settings beforehand.
Why doesn’t the engine temperature feature work?
You must have the optional temperature sensor installed correctly for
this feature to function. Review installation procedure. If the cable
has become disconnected, push the reset button on the back of Vapor
after reconnecting.
Why isn’t the RPM Graph working?
The engine sensor may be installed incorrectly. Review installation
procedure.
Everything is working, but the (K)MPH reading is way off!
The wheel sensor/magnet may be installed incorrectly. Double check
to make sure everything is set up right.
The wheel size setting may be incorrect. Please review wheel size
measurement instructions in this manual.
Vapor is not displaying information correctly!
If the wires on the back of Vapor become damaged, incorrect readings
may be displayed. Be careful to avoid twisting, crimping, kinking or
otherwise abusing the wires.
Frequently Asked Questions:
40
To Next Page
Loading...
Need help?
General