3
Precautions
When using Vapor, follow basic
precautions, including the
following:
• Read all instructions before
using Vapor.
• Use Vapor only for its intended
function.
• To reduce the risk of injury, do
not disassemble Vapor or its
accessories.
• Vapor can be used in the rain
but should not be used
underwater.
• Do not leave the main unit in
direct sunlight when not riding.
• Check relative positions and
gap between sensor and magnet
periodically.
• Do not bend, twist, kink or
otherwise abuse the black sensor
cable. A damaged cable may
produce incorrect readings.
• Do not abuse wires on back of
Vapor. The wires carry high
voltage power from the vehicles
ignition system. Damaged wires
may also produce incorrect
readings.
• Avoid contact with gasoline,
degreasers or other chemical
cleaners as they may damage
the computer.
WARNING:
REMEMBER TO PAY ATTENTION
TO THE TRAIL WHILE RIDING.
To Next Page
Loading...
Need help?
General