Resets temporary data:
• Maximum Speed (MS) • Distance (DST)
• Stop Watch (TT) • Maximum Temperature (MAX)
• Maximum RPM (MR)
This data should be reset to zero at the completion of a ride so that
new information can be logged on the next ride.
Notes:
• The reset can be done from any screen.
• Accumulated Ride Time (ART) and Odometer (ODO) cannot be
reset and are intended to maintain cumulative information.
TO RESET SINGLE-RIDE DATA, PRESS
If any wires become unplugged from Vapor, do a data reset after
everything is properly re-connected. Alternatively, push the red reset
button on the back of Vapor.
39
Normal Mode
Reset Single-Ride Data to Zero:
To Next Page
Loading...
