What to do if TRAK-IT Nail Gun pins cannot be driven?
If your TRAK-IT Nail Gun isn't driving pins, ensure the tool body is correctly loaded with pins, battery, and fuel cell. Check the tool body's LEDs and confirm that the fuel cell isn't empty or expired. Also, verify the battery has sufficient capacity, the nails aren't jammed, and the contact arm is properly pressed against the object.
How to fix TRAK-IT W3-21FRH battery that won't charge?
If your TRAK-IT Nail Gun battery isn't charging, make sure the AC adapter's power plug is firmly connected to the socket and that the adapter's jack is securely inserted into the charger. Also, ensure the battery is correctly placed in the charger and that the charger's LED is on.
What to do if TRAK-IT Nail Gun charger is overheating?
If the charger, AC adapter, or power cord of your TRAK-IT Nail Gun are overheating, emitting unusual sounds, or generating excessive heat during charging, stop using them immediately and consult your nearest distributor.
General safety precautions for tool operation, including PPE and proper handling.
Details product dimensions, weight, capacity, and fastener requirements.
Explains the safety mechanism preventing accidental nail discharge.
Guidelines for proper battery charging, usage, and maintenance.
Instructions for attaching the metering valve and inserting the fuel cell into the tool.
Steps for preparing, operating, and performing basic maintenance on the tool.
Guidelines for handling, cleaning, and inspecting the tool for optimal performance.
Guidelines for storing the tool when not in use to preserve its condition.
Procedures for removing jammed nails and a guide to common tool issues.
To Next Page
General