What to do if TRAK-IT Nail Gun pins cannot be driven?
If your TRAK-IT Nail Gun isn't driving pins, ensure the tool body is correctly loaded with pins, battery, and fuel cell. Check the tool body's LEDs and confirm that the fuel cell isn't empty or expired. Also, verify the battery has sufficient capacity, the nails aren't jammed, and the contact arm is properly pressed against the object.
How to fix TRAK-IT Nail Gun battery that won't charge?
If your TRAK-IT Nail Gun battery isn't charging, make sure the AC adapter's power plug is firmly connected to the socket and that the adapter's jack is securely inserted into the charger. Also, ensure the battery is correctly placed in the charger and that the charger's LED is on.
What to do if TRAK-IT W3-34CDH charger is overheating?
If the charger, AC adapter, or power cord of your TRAK-IT Nail Gun are overheating, emitting unusual sounds, or generating excessive heat during charging, stop using them immediately and consult your nearest distributor.
Wear safety glasses, ear protection, and appropriate work clothing.
Cautions for fuel cell handling, storage, and fire prevention.
Proper charging, usage, and handling of batteries and chargers.
Explains the tool's safety mechanism preventing accidental firing.
General handling instructions and how to attach the metering valve.
To Next Page
General