Tramontina 900 Series

Need help?

Do you have a question about the Tramontina 900 Series and is the answer not in the manual?

Summary

1.1. GENERAL REMINDERS

1.2. TECHNICAL DATA

1.5. SPECIAL REQUIREMENTS FOR THE INSTALLATION SITE

2.2. INSTALLATION

2.2.1. ELECTRICAL CONNECTIONS AND EQUIPOTENTIAL BONDING AND FOR ALL THE VERSIONS MOTORIZED

Details electrical connections, equipotential bonding, and wiring for motorized versions of the appliance.

2.2.2. CONNECTION TO WATERWORKS

2.2.3. GAS CONNECTION PROCEDURES

Step-by-step guide for connecting the gas supply, including safety checks and material requirements.

2.3. CHECKING THE OPERATION OF THE GAS SYSTEM

2.3.1. CONTROL OF THE GAS INLET PRESSURE

Method for measuring and verifying the gas inlet pressure using a pressure gauge.

2.3.3. CONTROL OF PILOT BURNER

2.3.4. OPERATION CONTROL

2.4. COMMISSIONING AND TESTING

2.5. CONVERSION TO OTHER TYPES OF GAS

2.5.1. REPLACEMENT OF INJECTORS FOR MAIN BURNERS

2.5.2. REPLACEMENT OF INJECTORS FOR PILOT BURNER

2.6. MAINTENANCE OF THE APPLIANCE

2.6.1. POSSIBLE FAILURES AND THEIR ELIMINATION

Troubleshooting guide for common problems, listing causes and solutions for burner ignition and temperature control.

3.1. WARNINGS AND HINTS FOR USER

3.2. INSTRUCTIONS FOR USE

3.2.1. SWITCH ON, START OF COOKING AND SWITCH OFF MOD. BRG92 MF0;BRG92 MC0

3.2.2. SWITCH ON, START OF COOKING AND SWITCH OFF MOD. BRG93 MF0;BRG93 MC0

3.3. CLEANING AND CARE OF THE APPLIANCE

3.5. SPECIAL PROCEDURES IN CASE OF FAILURES

4.2. MEASURING THE INLET PRESSURE

4.3. GAS COCK AND ADJUSTMENT

4.4. PILOT BURNER COMPONENTS

4.6. PRIMARY AIR REGULATION

4.9. WIRING DIAGRAM MOTOR-VERSION