Trane 4TXK6512G1000AA - Indoor Unit Dimensions and Air Ducting

Installation Procedure
lnstallation dimension
Indoor unit dimensions (unit:mm)
Unit model A B C D E F G H I
4MXD6512G1000AA 420 892 370 850 185 640 90 760 152
4MXD6518G1000AA
4MXD6524G1000AA
420 1212 370 1170 185 960 90 1080 152
Dimensions
Model
A(mm) B(mm) C(mm) D(mm) E(mm) F(mm)
4MXD6536G1000AA
4MXD6548G1000AA
966 1012 1170 480 269 0
4MXD6560G1000AA
850 1050 1272 600 363 233
Air Duct
 Each of the air sending duct and air return duct shall be fixed on the prefabricated panel of the floor by the iron
bracket . The recommended distance between the edge of the air return duct and the wall is over 150mm .
 The gradient of the condensate water pipe shall keep over 1% .
 The condensate water pipe shall be thermal insulated .
 When installing the ceiling Concealed type indoor unit, the air return duct must be designed and installed
as figure shown .
89
B
A
E
F