Trane 4TXK6548G1000AA - Foundation Work

12 18 24 36 48 60
A
500
510
590
600
580
600
B
266 313 320 405-410 380 405-410
C
286
347
365
450
413
450
D
243
278
298
367
340
368
W
775
798
818
947
960
950
H
535 525 600 960 1250 1350
Foundation work
 Check the strength and level of the installation ground so that the unit will not cause any operating vibration or
noise after installation .
 In accordance with the foundation drawing in the figure, fix the unit securely by means of the foundation bolts
. (Prepare four sets of M12 foundation bolts, nuts and washers each which are available on the market .)
 It is best to screw in the foundation bolts until their length are 20mm from the foundation surface .
 Fix the outdoor unit to the foundation bolts using nuts with resin washers(1) as shown in the figure .
If the coating on the fastening area is stripped off, the nuts rust easily .
Dimensions (bottom view)(unit of measurement:mm)
101