Trane AUH1C100A9481A User Manual

Upflow/ Horizontal, Downflow/ Horizontal,
Gas-Fired, Direct Vent Condensing
Furnaces
ALL phases of this installation must comply with NATIONAL, STATE AND LOCAL CODES
IMPORTANT — This Document is customer property and is to remain with this unit.
Please return to service information pack upon completion of work.
Installer’s Guide
*__First letter may be “A” or “T”
UPFLOW
*UH1
UPFLOW/HORIZONTAL
A341624P13
*UH1
*UH1B040A9241A
*UH1B060A9361A
*UH1B080A9421B
*UH1C080A9601A
*UH1C100A9481A
*UH1D100A9601A
*UH1D120A9601A
*DH1B040A9241A
*DH1B065A9421A
*DH1C085A9481A
*DH1D110A9601A
*DH1
DOWNFLOW
DOWNFLOW/HORIZONTAL
*DH1
18-CD29D1-11

Trane AUH1C100A9481A Specifications

General

Brand	Trane
Model	AUH1C100A9481A
Category	Furnace
Language	English

Summary

SAFETY SECTION

INSTALLATION INSTRUCTIONS

General Installation Instructions

General guidelines for proper unit installation and code compliance.

Location and Clearances

Guidelines for selecting an appropriate installation location and maintaining required clearances.

Air For Combustion and Ventilation

Requirements for providing adequate air for combustion and ventilation.

General Venting Instructions

Guidelines for proper venting system installation and safety.

Condensate Drain Instructions

Procedures for installing and maintaining the condensate drain system.

Electrical Connections

Wiring instructions for connecting the furnace to the electrical supply.

Gas Piping

Instructions for connecting the gas supply piping to the furnace.

START UP AND ADJUSTMENT

SEQUENCE OF OPERATION

Step-by-step explanation of the furnace's operating cycle.

CONTROL AND SAFETY SWITCH ADJUSTMENTS

Procedures for checking and adjusting furnace control and safety switches.

AIRFLOW ADJUSTMENT

Instructions for adjusting furnace airflow based on temperature readings.

ABNORMAL CONDITIONS

INTEGRATED FURNACE CONTROL ERROR FLASH CODES

Table of error codes displayed by the furnace's integrated control module.