EasyManua.ls Logo

Trane GGAA - Page 54

Trane GGAA
60 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
54
MUA-SVX005B-EN
Digit 18 Air Inlet Configuration
0 = None (Indoor Duct Furnace)
1 = Outside Air (OA) Horizontal Inlet
2 = Outside Air (OA) w/Air Hood
(a)
3 = Return Air (RA) Bottom Inlet
4 = Outside Air and Return Air (OA/RA)
5 = Outside and Return Air w/Air Hood
(a)
S = Special Air Inlet Configuration
Digit 19 Air Control & Damper
Arrangement
0 = None
A = Outside Air 2 Position Motor / Spring
Return
B = Return Air 2 Position Motor / Spring
Return
C = OA/RA 2 Position / Spring Return
E = OA/RA Mod. Motor w/Mixed Air Control /
Min. Pot. / SR
H = OA/RA Mod. Motor w/Mixed Air Control /
SR
K = OA/RA Mod. Motor w/Min. Pot. / SR
M = OA/RA Mod. Motor w/Dry Bulb / Mixed
Air Control / Min. Pot. /SR
N = OA/RA Mod. Motor w/Enthalpy Controlled
Economizer / SR
P = OA/RA Mod. Motor w/Pressure Control
(Space Pressure)
Q = OA/RA Mod. Motor w/ Carbon Dioxide
(CO
2
) R/A Monitor
R = OA/RA Mod. Motor w/S-350-P
Proportional Mixed Air Control / SR
U = OA/RA Mtr. w/External 0-10 VDC and 4-
20 mA Analog Input/SR (External Input)
W = ASHRAE Cycle I (OA/RA 2 Pos. w/Warm-
up Stat/SR)
X = ASHRAE Cycle II (OA/RA Mod. w/Warm-
up Stat / Mixed Air / Min. Pot. / SR)
Y = ASHRAE Cycle III (OA/RA Mod. w/Warm-
up Stat / Mixed Air / SR)
Z = Manual Dampers
S = Special Air Control and Damper
Arrangement
Digit 20
0 = Non-California Shipment
1 = California Shipment
Digit 21 Miscellaneous Options
A = Orifices for Elevation Above 2000 Feet
(Specify Elevation)
B = 12” Evaporative Media (Celdek)
C = Moisture Eliminator
D = Horizontal Return
E = Air Flow Proving Switch
F = Freezestat w/Time Delay
G = Fan Time Delay (Indoor Duct Furnace)
H = Return Firestat
J = Supply Air Firestat
K = Manual Blower Switch
L = 409 Stainless Steel Furnace Drip Pan
M = Input Derate
N = Double Wall Construction
P = Low Leak Dampers
Q = Clogged Filter Switch
R = High/Low Gas Pressure Limit Switches
T = Status Indicator Lamps (Elec Cabinet)
V = Manual Reset High Limit Switch
W = 8" Evaporative Media (Glasdek)
X = 12" Evaporative Media (Glasdek)
Y = Ambient Lockout
Z = Freezestat for Evaporative Cooler
0 = No Filters
1 = 1” Washable (Standard) Filters
2 = 2" Washable Filters
3 = 2" Throwaway Filters
4 = 1" 30% Pleated Filters
5 = 2" 30% Pleated Filters
Digit 22 VFD Accessories
1 = Field Installed VFD
2 = Factory Installed VFD
3 = VFD Remote Keypad (Field Installed)
4 = CO
2
Sensor, 100% Outside Air
5 = CO
2
Sensor, Mixed Air
6 = Pressure Sensor
7 = 2-Speed VFD Relays
8 = 3-Speed VFD Relays
9 = VFD Enclosure (Only with Factory
Installed VFD)
(a) Hood shipped separately
IInnddoooorr MMaakkee--UUpp AAiirr UUnniitt NNuummbbeerr DDeessccrriippttiioonn

Table of Contents