Trane MITSUBISHI ELECTRIC NTXSKS36A112A Series User Manual

INSTALLATION MANUAL
For safe and correct use, read this manual and the indoor unit installation manual thoroughly before installing
the air-conditioner unit.
MANUEL D’INSTALLATION
Avant d’installer le climatiseur, lire attentivement ce manuel, ainsi que le manuel d’installation de l’appareil
intérieur pour une utilisation sûre et correcte.
MANUAL DE INSTALACIÓN
Para un uso correcto y seguro, lea detalladamente este manual y el manual de instalación de la unidad interior
antes de instalar la unidad de aire acondicionado.
POUR L’INSTALLATEUR
PARA EL INSTALADOR
FOR INSTALLER
Air-Conditioners
NTXSKS18A112A✱
NTXSKS24A112A✱
NTXSKS30A112A✱
NTXSKS36A112A✱
Français
Español
English
VG79A981H01_cover1.indd 1 2018/08/31 15:53:09

Trane MITSUBISHI ELECTRIC NTXSKS36A112A Series Specifications

General

Brand	Trane
Model	MITSUBISHI ELECTRIC NTXSKS36A112A Series
Category	Air Conditioner
Language	English

Summary

The following should always be observed for safety

Selecting the installation location

Outdoor unit

Guidelines for choosing an appropriate outdoor installation location, considering wind, airflow, noise, and structural support.

Installation diagram

Refrigerant piping work

Refrigerant pipe

Specifies pipe length, height difference, and bend limits for refrigerant lines between indoor and outdoor units.

Flaring work

Details the procedure for cutting, preparing, and flaring copper pipes for refrigerant connections.

Connecting pipes

Instructions for securely connecting refrigerant pipes using flare nuts, including lubrication and tightening torque.

Purging procedures and leak test

Outlines steps for vacuuming the refrigerant circuit and performing a leak test after pipe connections.

Electrical work

Connecting wires for outdoor unit

Step-by-step guide for connecting power supply and indoor/outdoor unit connecting wires to the outdoor unit.

Field electrical wiring

Details wiring specifications, wire sizes, circuit ratings, and voltage requirements for field electrical connections.

Maintenance

Gas charge

Procedure for charging the system with the specified amount of refrigerant, including precautions and necessary equipment.