EasyManua.ls Logo

Trane MITSUBISHI ELECTRIC NTXSKS18A112A Series User Manual

Trane MITSUBISHI ELECTRIC NTXSKS18A112A Series
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
INSTALLATION MANUAL
For safe and correct use, read this manual and the indoor unit installation manual thoroughly before installing
the air-conditioner unit.
MANUEL D’INSTALLATION
Avant d’installer le climatiseur, lire attentivement ce manuel, ainsi que le manuel d’installation de l’appareil
intérieur pour une utilisation sûre et correcte.
MANUAL DE INSTALACIÓN
Para un uso correcto y seguro, lea detalladamente este manual y el manual de instalación de la unidad interior
antes de instalar la unidad de aire acondicionado.
POUR L’INSTALLATEUR
PARA EL INSTALADOR
FOR INSTALLER
Air-Conditioners
NTXSKS18A112A
NTXSKS24A112A
NTXSKS30A112A
NTXSKS36A112A
Français
Español
English
VG79A981H01_cover1.indd 1 2018/08/31 15:53:09
Question and Answer IconNeed help?

Do you have a question about the Trane MITSUBISHI ELECTRIC NTXSKS18A112A Series and is the answer not in the manual?

Trane MITSUBISHI ELECTRIC NTXSKS18A112A Series Specifications

General IconGeneral
BrandTrane
ModelMITSUBISHI ELECTRIC NTXSKS18A112A Series
CategoryAir Conditioner
LanguageEnglish

Summary

Installation Manual

For Installer

Instructions specifically for installers, guiding safe and correct setup.

Safety Precautions

Installation Location Selection

Outdoor Unit Location

Guidance on selecting an appropriate installation site for the outdoor unit of the air conditioner.

Outdoor Unit Drain Piping

Instructions for installing the outdoor unit's drain piping to prevent water damage.

Refrigerant Piping Work

Refrigerant Pipe Specifications

Details on pipe length, height difference, and bend limits for refrigerant lines.

Flaring Work Procedures

Step-by-step instructions for correctly performing flaring on refrigerant pipes.

Connecting Refrigerant Pipes

Procedures for connecting refrigerant pipes, including torque and oil application.

Purging and Leak Testing

Steps for purging air and performing a leak test on the refrigerant system.

Electrical Work

Outdoor Unit Wiring Connections

Detailed steps for connecting electrical wires to the outdoor unit of the air conditioner.

Field Electrical Wiring Specifications

Specifications for field electrical wiring, including wire sizes and circuit ratings.

Maintenance Procedures

Refrigerant Gas Charging

Procedure for charging the system with the correct amount of refrigerant gas.

Related product manuals