Trane Mitsubishi Electric NTXMMX36A142A Series User Manual

Split-type Air-Conditioner
NTXMMX24A132A✱
NTXMMX30A132A✱
NTXMMX36A142A✱
Installation Manual
For INSTALLER
• This manual only describes the installation of outdoor unit.
When installing the indoor unit, refer to the installation manual of indoor unit.
Any structural alterations necessary for installation must comply with local build-
ing code requirements.
Notice d’installation
Destinée à l ’ INSTALLATEUR
• Cette notice ne décrit que l’installation de l’appareil extérieur.
Lors de l’installation de l’appareil intérieur, consultez la notice d’installation de cet
appareil.
Toute altération structurelle requise pour l’installation doit être conforme aux exi-
gences du code du bâtiment local.
Manual de instalación
Para el INSTALADOR
• En este manual sólo se describe la instalación de la unidad exterior.
Para instalar la unidad interior, consulte el manual de instalación de dicha uni-
dad.
Cualquiermodicaciónestructuralnecesariaparallevaracabolainstalaciónde-
berácumplirlasnormasdeedicaciónlocales.
Español
Français
English
WG79A765H01_01En.indd 1 2018/08/03 9:41:29

Trane Mitsubishi Electric NTXMMX36A142A Series Specifications

General

Phase	1
Series	NTXMMX36A142A
Capacity (BTU)	36, 000 BTU
Cooling Capacity	36, 000 BTU
Heating Capacity	36, 000 BTU
HSPF Rating	10.0
Refrigerant	R410A

Summary

Before Installation

Safety Precautions

Essential safety warnings and precautions for installation and operation.

Specifications

Technical specifications for the air conditioner models, including electrical and refrigerant data.

Optional Joints Selection

Guidance on selecting optional different-diameter joints for pipe connections.

Installation Location Selection

Criteria and factors for choosing the appropriate installation site for the outdoor unit.

Free Space Requirements for Outdoor Unit

Minimum clearance dimensions required around the outdoor unit for proper installation and ventilation.

Installation Diagram

Visual guide illustrating the installation layout and connections for the outdoor unit.

Outdoor Unit Installation

Unit Installation Procedures

Steps and guidelines for physically mounting and securing the outdoor unit to the foundation.

Outdoor Unit Wiring Connections

Detailed instructions for making electrical connections to the outdoor unit, including safety.

Pipe Connection and Flaring

Flaring Work

Procedure for correctly flaring copper pipes for refrigerant connections.

Pipe Connection

Steps for connecting the refrigerant pipes to the outdoor unit, including tightening torque.

Insulation and Taping

Guidelines for insulating and taping refrigerant pipes to prevent condensation and burns.

System Preparation and Testing

Purging and Leak Testing

Steps for purging air and performing leak tests on the refrigerant system.

Refrigerant Gas Charge

Procedure for charging the correct amount of refrigerant into the system.

Test Run

Instructions for performing a test run to verify proper operation and detect wiring issues.

User Explanation

Guidance on explaining the unit's operation and maintenance to the end-user.

Pumping Down Refrigerant