13
Pub. No. 22-1670-10
Dimensions
TDC1 OUTLINE DRAWING
(ALL DIMENSIONS ARE IN INCHES)
Model
(See Note 1 & 2)
DIM "A" DIM "B" DIM "C" DIM "D"
*DC1B040A9241
*DC1B060A9361
*DC1B080A9421
17-1/2" 2-1/4" 16-1/4" 16"
*DC1C100A9481 21" 2-1/2" 19-3/4" 19-1/2"
*DC1D120A9601 24-1/2" 2-15/16" 23-1/4" 23"
* Prefix may be "A" or "T"
Notes:
1. Diameter of Vent Pipe may be limited to 2-1/2" or 3" on some
models at different altitudes. Refer to the Vent Length Table for
proper application.
1-1/2 x 2-1/2 OVAL
GAS CONNECTION
Ø 1-5/8” HOLE WITH PLUG
Ø 7/8” HOLE WITH PLUG
Ø 1-5/8” HOLE WITH PLUG
CONDENSATE DRAIN
Ø 1-5/8” HOLE WITH PLUG
GAS CONNECTION
(ALTERNATE)
1-5/8” HOLE WITH PLUG
1-3/4 X 2-13/32 CUTOUT
HORIZONTAL DRAIN
20-1/4
To Next Page
Loading...