To Next PageTo Next Page
Need help?Do you have a question about the Trane TDH1B065A9421A and is the answer not in the manual?
General| Model Number | TDH1B065A9421A |
|---|---|
| Category | Furnace |
| Heating Capacity | 65, 000 BTU |
| Input BTU | 65, 000 |
| Output BTU | 62, 000 |
| Blower Motor Type | ECM |
| Fuel Type | Natural Gas |
| Ignition Type | Hot Surface Ignition |
| Heat Exchanger Material | Stainless Steel |
| Warranty | 10-Year Limited Warranty |
Crucial safety warning about CO risks and required precautions.
Covers manufacturer's responsibilities, code compliance, and general installation procedures.
Details required space and distance from combustible materials for safe installation.
Explains requirements for providing adequate airflow for furnace operation.
Provides guidance on proper installation and maintenance of condensate drainage systems.
Details wiring procedures for safe and proper electrical hookup of the furnace.
Outlines requirements for safe and compliant installation of gas supply piping.
Steps to take before powering up the furnace to ensure proper setup.
Procedures for safely igniting the furnace burners during startup.
Instructions on how to adjust fan speed for optimal air circulation.
Describes the step-by-step process of how the furnace operates when called for heat.
Explains what happens and how to handle a loss of flame during operation.
Describes issues arising from blocked condensate drains and how to resolve them.
Details the burner box limit switch function and troubleshooting for shutdowns.
Guidance on various vent and inlet pipe configurations for proper furnace venting.
Instructions for safely terminating vent pipes through a roof structure.
Procedures for routing vent pipes through floors, including clearances and sealing.
Requirements for installing CO detectors as mandated by Massachusetts regulations.
Details the inspection process by state/local inspectors for installation approval.
