Min. 15 min, Max. 240 min.
Thermostat software version no.
Display
Language
English, French, German Spanish,
Italian, Dutch, Portuguese, Polish, Czech,
Password
Configuration
• Network status: Online means that connection between thermostat and unit controller module via Modbus
is operational. Offline means that thermostat does not communicate with the controller. Please check
connection, wiring scheme.
• Thermostat sensor: There is possibility to control the unit by thermostat built-in temperature sensor (to
set „Yes“), by space temperature local sensor („No“) or by return air temperature sensor („No“). It depends
on an equipment of the unit installation.
• Override time: To define a period for override mode.
• Factory settings: To put thermostat to factory settings. Put „Yes“, confirm and confirm one time again by
a touch on the button „Confirmation“.
• Version: Thermostat software version is diplayed in right lower corner.
Display
• Language: To select one from 10 languages available.
• Color: There are 4 colors of the background available.
• Backlight: To set required backlight of the screen. It is active after few seconds of no touch of the screen.
• Password: User and Service code should be changed. To change a password touch the current code
(user or service), then touch 4 digits on next page, set new code on the displayed keyboard and confirm
new code.
The password and relevant access is active within 15 minutes. The code is required again after this period
when no action is taken with thermostat.
Menu & Factory access
Factory access is reserved only to a Field Service Representative for example when a customer forgets Service
code.
To Next Page
Loading...