Trane X13790993001 User Manual

May 2020
BAS-SVU040G-EN
SAFETY WARNING
Only qualified personnel should install and service the equipment. The installation, starting up, and servicing of
heating, ventilating, and air-conditioning equipment can be hazardous and requires specific knowledge and training.
Improperly installed, adjusted or altered equipment by an unqualified person could result in death or serious injury.
When working on the equipment, observe all precautions in the literature and on the tags, stickers, and labels that are
attached to the equipment.
Trane® Commercial Touch Screen
Programmable Zone Sensor
for Tracer® UC400, ReliaTel™ and Symbio™
800 Controls
User Guide
Part Numbers:
UC400: X13790993001 (SEN02587)
ReliaTel™: X13790994001 (BAYSENS924)
Symbio™ 800: X13791009001 (BAYSENS800A)

Trane X13790993001 Specifications

General

Brand	Trane
Model	X13790993001
Category	Touch Panel
Language	English

Summary

Introduction and Safety

Safety Advisories and Precautions

Defines warning types and outlines installation/system precautions.

Copyright and Trademarks

Legal notices regarding document ownership and intellectual property.

General Information

Home Screen Overview

Explanation of key display elements like Occupancy Status, Fan Status, Setpoints, and Message Line.

Configuring Settings

Home Screen Settings and Modes

Configuration of system mode, fan mode, and home screen options.

Schedule and Override Management

Procedures for accessing schedule menus, setting events, and managing overrides.

Touch Button Legend

Description of the function of various touch screen buttons.

Interface Flowcharts and User Menus

User Menu Navigation

Visual guide to navigating sensor menus using the Schedule Menu button.

Menu Configuration Details

Details on configuring clock, schedule, setpoints, and options within the user menus.

Specifications

Clock, Schedule, Setpoints, and Options Parameters

Detailed explanation of configurable parameters for clock, schedule, setpoints, and options.

Operating Ranges and Electrical Specifications

Covers setpoint ranges, deadband, power, housing, and wire specifications.

Compliance and Standards

Details on safety, EMC, and RoHS compliance standards.