X39641147-01B • Enclosure Installation Sheet 2
Model Numbers and Specifications
Model Numbers and Specifications
Model Numbers
Before installing the controller, verify the correct model for local power requirements. The model number is on the
shipping label or on the product label inside the enclosure. Refer to the listing below and to Figure 3, p. 6 for a visual
representation:
• X13651534010, 120 Vac with outlet
• X13651535010, 230 Vac with no outlet
Operating Environment Specifications
Make sure that the operating environment conforms to the specifications listed in Table 1.
Table 1. Specifications
Temperature From 32°F to 122°F (0°C to 50°C)
Humidity 5–95% non-condensing
Power requirements
120 Vac, 6A maximum, 1 phase, 50/60 Hz
230 Vac, 1 A maximum, 1 phase, 50/60 Hz
Power Output 76 VA at 24 Vac
Weight Mounting surface must be able to support 60 lb. (28 kg)
Dimensions 16 ½ in. × 14 ¾ in. × 5 ½ in. (418 mm × 373 mm × 140 mm)
Altitude 6500 ft (2000 m) maximum
Installation U.L. 840: Category 3
Pollution U.L. 840: Degree 2
To Next Page
Loading...