Trane Tracer X13651534010 User Manual

© 2009 Trane All rights reserved
May 2009
X39641147-01B
Installation Sheet
Enclosure for Tracer™ DIN-mounted Controllers
Ordering Number: X13651534010 (120 Vac, w/outlet); X13651535010 (230 Vac, no outlet)
These instructions will provide the following:
• Warnings, Cautions, and Notices
• Model numbers and specifications
• Minimum clearances and dimensions
• Mounting and wiring
• Installing the enclosure door
NOTICE
Avoid Equipment Damage!
Install and use the controllers as specified by the manufacturer. Failure to do so could result in equipment damage.
Warnings, Cautions, and Notices
Warnings, cautions, and notices are provided in appropriate places throughout this document:
 WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious
injury.
CAUTION: Indicates a potentially hazardous situation which, if not avoided, could result in minor or moderate
injury. It may also be used to alert against unsafe practices.
NOTICE: Indicates a situation that could result in equipment or property-damage only accidents.

Trane Tracer X13651534010 Specifications

General

Category	Enclosure
MPN	X13651534010
Material	Steel
Color	Gray
Weight	10 lbs

Summary

Warnings, Cautions, and Notices

Equipment Protection Notice

Emphasizes the importance of following manufacturer specifications to prevent equipment damage.

Model Numbers and Specifications

Model Identification

Lists specific model numbers and their corresponding voltage and outlet configurations.

Operating Environment Specifications

Outlines the operating temperature, humidity, power requirements, weight, and dimensions.

Minimum Clearances and Dimensions

Mounting and Wiring

Location Requirements

Specifies optimal indoor placement for the controller, considering access and security.

Mounting Instructions

Provides step-by-step guidance on how to physically install the enclosure onto a mounting surface.

High-Voltage AC Power Wiring

Details critical safety warnings, precautions, and requirements for connecting high-voltage AC power.

Installing the Enclosure Door