7 X39641147-01B • Enclosure Installation Sheet
Installing the Enclosure Door
Installing the Enclosure Door
Note: Before installing the enclosure door, unpack the door and check for missing or damaged parts and any cracks in
the plastic. Then, ensure that the magnetic catch is installed.
To install the enclosure door:
1. Hold the door at a 90° angle from the enclosure as shown in Figure 4.
2. Align the hinge pegs on the door with the hinge holes on the enclosure.
3. Gently lower the door until it rests securely in the hinge holes.
4. Verify that the door swings freely on the hinges and that the magnetic catch holds the door securely when it is closed.
Figure 4. Door alignment
Door pegs and hinge holes,
top and bottom.
Mounting hole (4x)
Magnetic catch
(inside door not
shown).
M
e
t
a
l
d
o
o
r
f
l
a
n
g
e
t
h
a
t
s
e
c
u
r
e
s
t
o
m
a
g
n
e
t
i
c
c
a
t
c
h
.
To Next Page
Loading...