Trane TTK 536 KD User Manual

November 2012 TTK-SVN001-EN
Installation Manual
Mini-Split System
Condensing Units
9,000 - 60,000 Btuh
TTK Series 50/60 Hz
50Hz Models
Cooling Only
TTK 509 PB
TTK 512 PB
TTK 512 LB
TTK 518 PB
TTK 518 LB
TTK 524 PB
TTK 524 LB
TTK 530 PB
TTK 530 KB
TTK 536 KB
TTK 536 KD
TTK 042 KD
TTK 048 KD
TTK 060 KD
60Hz Models
Cooling Only
TTK 512 P1
TTK 518 P1
TTK 524 P1
TTK 530 P1
TTK 536 K1
TTK 536 K4
TTK 042 K4
TTK 048 K1
TTK 048 K4
TTK 060 K1
TTK 060 K4
Layout 14/1/03, 10:16 AM1
Black

Trane TTK 536 KD Specifications

General

Brand	Trane
Model	TTK 536 KD
Category	Air Conditioner
Language	English

Summary

Pre-Installation Check

Items Required for Installation

Location and Unit Installation

Selecting Mounting Locations

Condensing Unit Installation

Procedures for installing mounting pads and securing the condensing unit on a stable surface.

Refrigerant Tubing Connection

Flaring Procedure

Detailed steps for cutting, deburring, and flaring copper tubes for secure refrigerant line connections.

Bending and Connecting Tubes

Evacuation and Refrigerant Charge

Air Evacuation and Charging

Process for evacuating air and charging refrigerant using vacuum pump and micron gauge.

Additional Charge and Leak Inspection

Procedures for adding refrigerant for longer lines and checking for gas leaks.

Electrical Installation

Condensing Unit Wiring

Steps for wiring the condensing unit, including checking ratings, grounding, and connecting to terminal blocks.

Finishing and Run Tests

Finishing Procedures

Run Tests and Outdoor Unit Checks

Typical Wiring Diagrams