Transcend DrivePro 620 - 2-4 Connecting to Power

4. Turn the adjustment knob anticlockwise to loosen, and then adjust the DrivePro ’ s position.
5. After the DrivePro is in the best position, turn the adjustment knob clockwise to ensure that the
DrivePro is securely locked in place.
2-4 Connecting to Power
"Note"
Insert a microSD memory card before connecting the DrivePro to your car power outlet. Transcend
recommends having an experienced installer with proper knowledge of the vehicle install the
device to ensure your safety. Transcend assumes no responsibility for any damage to vehicles in
connection with an improper installation.
