Transcend JetFlash 820 - Driver Installation; Driver Installation - Windows Me, 2000, XP, 7 and Vista; Driver Installation - Mac OS 9.0, or Later; Driver Installation - Linux Kernel 2.4.2, or Later

3
Driver Installation
Driver Installation – Windows
®
Me, 2000, XP, 7 and Vista
No drivers are required. Newer Windows operating systems have built-in drivers that
support the JetFlash
®
. Simply plug your JetFlash
®
into an available USB port and
Windows will automatically install the files needed to use your device. A “Removable Disk”
with a newly assigned drive letter will appear in the My Computer window.
Driver Installation – Mac
®
OS 9.0, or Later
No drivers are required. Just plug the JetFlash
®
into an available USB port and your
computer will automatically detect it.
Driver Installation – Linux
®
Kernel 2.4.2, or Later
No drivers are required. Just plug the JetFlash
®
into the USB port and mount it.
Example: 1. First create a directory for the JetFlash
®
:
“mkdir /mnt/jetflash”
2. Mount the JetFlash
®
:
“mount –a –t msdos /dev/sda1 /mnt/jetflash”