F. OTHER FEATURES
23
G. STATION PROGRAMMING
G.01 Call Forwarding
1. To forward All Calls:
All incoming calls (Incoming CO, Intercom and Transferred CO Lines) to your
Extension are automatically forwarded to any other Extension, Voice Mail or another
outside number such as a cell phone.
To Forward:
→
[FWD]
→
Ext. No. Press [PRG], [FWD] key.
Dial [1] for Any Call,
[2] for Busy,
[3] for Busy/No Answer
[4] for No Answer
[5} for Clearing Forward
Dial the ext. or hunt group number you want your
calls forwarded to or 86 for built in voice mail.
When activated, your forward key will flash.
To Enable and Disable Call Forwarding:
Simply Toggle [FWD] key.
Call Forward LED will flash when active and be out when the forwarding is inactive.
2. When Busy or No Answer:
If your Extension fails to answer after programmed time (10 to 100 seconds) or is
busy, all incoming calls to your Extension are automatically forwarded to any other
Extension you have programmed.
3. To forward an external number:
Program the external speed number:
→
→→
→
,
→
→→
→
→
→→
→
[DSS1~10]
→ Number →
Busy
Press [PRG], [SPD], [DSS] key.
Enter the outside telephone number and [SAVE].
To Forward:
→
[1]
→
[DSS] Press [PRG], [1], [DSS] key.
When activated, your forward key will flash.
To Next Page
