To Next PageTo Next Page
Need help?Do you have a question about the Trantec S4.04 Series and is the answer not in the manual?
General| Modulation Type | FM |
|---|---|
| Dynamic Range | >100dB |
| Channels | 4 |
| Transmitter Power | 10mW |
| Signal to Noise Ratio | > 100 dB |
| Total Harmonic Distortion | < 0.5% |
| Operating Range | Up to 100 m |
| Power Supply | 2 x AA batteries |
| System Type | UHF Wireless Microphone System |
Explains safety symbols and messages used in the manual to prevent injury and damage from mishandling.
Safety guidelines for installing the receiver to prevent hazards like electric shock and personal injury.
Safety guidelines for using the receiver to avoid fire, electric shock, or personal injury.
Safety guidelines for using the microphone or transmitter, especially near medical equipment.
Describes the TRANTEC S4 series wireless microphone system's design and applications.
Details specific models like S4.04, S4.10, HDX, BTX, and RX receivers.
Highlights features like PLL-synthesizer, power/battery lamps, battery life, and quick channel setup.
Precautions for avoiding unit failure due to environmental factors, damage, or improper use.
Guidelines for unit placement, cleaning methods, and avoiding interference.
Recommendations for keeping microphones apart and away from antennas to prevent malfunctions.
Identifies and describes front panel controls and indicators for the receiver.
Identifies and describes rear panel connections and controls for the receiver.
Illustrates and labels parts of the handheld microphone.
Illustrates and labels parts of the belt-pack transmitter.
Step-by-step guide for setting the channel number manually on the receiver.
Important notes regarding channel setting, occupied channels, and transmitter synchronization.
Steps for synchronizing the transmitter and receiver channels using infrared communication.
Instructions for performing an automatic channel scan to find an idle frequency.
Guidance for setting up multiple wireless systems to avoid interference.
Explains the LED indicators for low battery capacity in the transmitter.
Information on optimal transmitter range and causes of signal dropouts.
Advice on microphone placement and handling for best sound reproduction.
Details common problems like no sound or distorted sound and their solutions.
Technical details for the wireless system, including modulation, frequency range, and operating parameters.
Technical details for the handheld and belt-pack transmitters.
Technical details for the wireless receivers.
Lists included accessories like AC adapter and microphone holder.
Statement of compliance with FCC Part 15 rules for the wireless receiver.
Statement of compliance with EU directives (RED, RoHS) for the wireless receiver.
Details compliance statements for various European countries regarding the wireless microphone system.
