Need help?Do you have a question about the Trantec S4.4 and is the answer not in the manual?
General| Modulation | FM |
|---|---|
| Dynamic Range | >100 dB |
| Channels | 4 |
| RF Output Power | 10 mW |
| Audio Frequency Response | 15 kHz |
| Operating Range | 100m (typical) |
| System Type | UHF Wireless Microphone System |
| Receiver Type | Diversity |
Safety guidelines for operating the Trantec S4.4 system, including temperature, cleaning, and power adapter usage.
Diagram and explanation of the receiver's front and rear panel components and connections.
Step-by-step instructions for connecting the AC adaptor and setting up the receiver.
Identification of handheld transmitter parts and guide for inserting the 9V battery.
Procedure for selecting the operating channel on the handheld transmitter.
Diagram of the beltpack transmitter and instructions for battery replacement.
Guide for connecting the lapel-type microphone to the beltpack transmitter's 3.5mm socket.
Instructions for connecting the beltpack transmitter to musical instruments using the instrument cord.
How to adjust the AF gain on the beltpack transmitter for optimal signal quality.
Procedure for selecting the operating channel on the beltpack transmitter.
Recommendations for maximizing operating distance and ensuring good signal reception.
Tips for simultaneously using multiple S4.4 systems without interference.
Instructions for adjusting the squelch control to minimize interference.
Guidance on setting the receiver's AF gain for optimal audio output.
Details on battery type, expected usage time, and the low battery status indicator.
Checklist for resolving common problems such as no RF signal or no audio.
Specifications for the handheld transmitter, including operating voltage, power, and dimensions.
Specifications for the beltpack transmitter, including controls, connectors, and approvals.
To Next Page
