Lifan Engine
Starting
Step 1
Turn the Fuel Line “on/off” valve
to the “on” (vertical) position.
Step 2
Start Up: Turn the “Red” ignition
switch to the “On” position.
Step 3
Start Up: Adjust the Choke lever
to the left, “closed” position.
Step 4
Start Up: Adjust the Throttle lever
to “half” throttle position.
Step 7
Once the motor has been running
for 1-2 minutes adjust the Throttle
lever for the desired engine speed.
Step 5
Pull starter cord with 3-5 rapid, smooth pulls.
The engine will fire and start running.
Step 6
Running: With the motor running,
open (move to the right) the Choke lever.
Choke “Closed”
Choke “Opened”
Page 3 of 4
To Next Page
