EasyManua.ls Logo

TRAPP LF-40G - Air Filter

TRAPP LF-40G
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ENGLISH
52
www.trapp.com.br
Air Filter
Attention!
All maintenance and cleaning should be made
with the equipment switched off and the spark
plug wire disconnected.
The air lter shall be always clean for the engine to
work perfectly.
Blocking of the air lter due to lack of cleaning
causes serious operating problems for the engine,
among them loss of power, and damage to the
cylinder, piston and piston rings.
Air lter - foam
Dip and tighten (do not twist) it in a solution of
neutral detergent and water, removing all the dirt.
Dry it, rolling and pressing it in a dry cloth (do not
twist it).
Moisten the lter slightly with clean oil (20W-50),
always pressing it to distribute the oil equally,
removing the excess.
Attention!
Whenever performing any cleaning or
maintenance operation, rst make sure
that the engine is off and the blade is
stopped. The cutting blade continues in
movement during a few seconds after the
engine is off.
Disconnect the spark plug wire.
Be careful, do not put your hands or feet
close or inside the mower base or in exhaust
in order to avoid accidents.
3.5 HP
Image merely illustrative.
1
2
3
4
5
Image merely illustrative.
1
3
2
4
5
6.5 HP
1. Fuel tank cover
2. Retractile starting cable
3. Oil gauge rod and location of the crankcase
4. Air lter
5. Spark plug

Related product manuals