1. Optical or coaxial output jacks should be available on the PC sound
card.
2. Connect the output jacks to the optical and coaxial input jacks of
DAC2.
3. Be sure the digital output of the sound card is in ON status.
4. Select the DAC2 input mode “ OPTICAL” or “ COAXIAL”
accordingly.
Connecting PC via Bluetooth
1. Select the DAC2 input mode “ WIRELESS”.
2. Install and configure Bluetooth adaptor in your windows system.
3. Turn on the DAC2 power switch.
4. Pair the Bluetooth for first time use by pressing the “PAIR/MUTE”
button until the blue indicator light flashes, search Bluetooth device in
your computer and enter the pair code “8888”.
5. A2DP link can be established after paired.
6. See more details on page “7” ( Bluetooth connection ) .
Connecting a CD player
1. Optical or coaxial output jacks should be available on the CD player.
2. Connect CD player’s output port to MDAC2’s optical or coaxial input
port.
3. Select input mode “ OPTICAL” or “COAXIAL.”
4. Be sure the player’s digital output is enabled, and select “ Stereo”
sound channel.
5. The blue indicator light of DAC2 will be on when playing a disc.
Connecting a mobile phone
1. Select the DAC2 input mode “ WIRELESS”.
2. Open the Bluetooth of your mobile phone.
3. Turn on the DAC2 power switch.
4. Pair the Bluetooth for first time use by pressing the “PAIR/MUTE”
button until the blue indicator light flashes, search Bluetooth device in
your mobile phone and enter the pair code “8888”.
5. A2DP link can be established after paired.
6. See more details on page “7” ( Bluetooth connection ) .
6
To Next Page
Loading...