EasyManua.ls Logo

Travel Vision R6 User Manual

Travel Vision R6
68 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
www.travel-vision.com
USER MANUAL
(Page 2)
GEBRUIKSAANWIJZING
(Pagina 19)
BENUTZERANLEITUNG
(Seite 36)
MANUEL DE L'UTILISATEUR
(Page 53)
Travel Vision R6 ®
Version 1.2 December 2014, from firmware 1.0.22

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Travel Vision R6 and is the answer not in the manual?

Travel Vision R6 Specifications

Power IconPower
power adapter230 V AC to 24 V DC
power usageMax. 950 mA
wiring75 Ω double shielded (15 m supplied by default)
Weight and Dimensions IconWeight and Dimensions
dish diameter R6 5555 cm
dish diameter R6 6565 cm
weight R6 557.4 kg
weight R6 658.5 kg
packing dimensions66 x 38 x 83 cm
packing weightApprox. 10 kg

Summary

Warnings and Remarks

Safety Instructions and Warnings

Control Module and Setup

Control Module Functions and Buttons

Overview of the control module, its functions, buttons, and USB port.

Mounting the Antenna Dish

Electric Connection Procedure

Satellite Searching Process

GPS Location and Satellite Selection

LNB Position Adjustment

How to adjust the LNB based on satellite selection for optimal reception.

Calibration and Optimization

Satellite Search Remarks

Error Messages and Troubleshooting

Error: No 24V Connected

Addresses issues related to the power supply connection.

Error: Voltage Low

Diagnoses and resolves low voltage warnings.

No LNB Signal

Checks for issues related to the LNB signal reception.

Error E: OXBAFF

Specific error code indicating a fault requiring repair.

Troubleshooting Specific Issues

Related product manuals