EasyManua.ls Logo

Travel Vision R7 80 User Manual

Travel Vision R7 80
61 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
www.travel-vision.com
USER MANUAL
(Page 2)
BENUTZERANLEITUNG
(Seite 22)
GEBRUIKSAANWIJZING
(Pagina 42)
Travel Vision R7 80 ®
EUROPE
Version 1.3 October 2018

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Travel Vision R7 80 and is the answer not in the manual?

Travel Vision R7 80 Specifications

General IconGeneral
BrandTravel Vision
ModelR7 80
CategoryAntenna
LanguageEnglish

Summary

Safety Instructions and Warnings

General Safety Precautions

Covers safe handling of tripod, dish, LNB arm, and alignment procedures.

Electrical and Cable Safety

Details safe system connection and coaxial cable management.

Vacation Preparation Tips

System Components Overview

Core Components Identification

Identifies the main parts like dish, LNB, control module, and tripod.

Accessory Identification

Details included accessories like coaxial cable and power adapter.

Control Module Functions

Module Operations and Buttons

Explains module functions, buttons, and ports.

Setup Location Selection

Choosing an Ideal Spot

Guidance on selecting a suitable and unobstructed location for the antenna.

Antenna Dish Mounting

Mounting to Tripod

Step-by-step guide to mounting the dish onto the tripod.

LNB Arm and Cable Connection

Instructions for adjusting the LNB arm and connecting the coaxial cable.

Electrical Connections

System Wiring Diagram

Illustrates the connection path from the R7 to the receiver/TV via coaxial cable.

Cable Connection Procedure

Details the procedure for connecting the coaxial cable to the dish and receiver.

Satellite Search Initiation

Starting the Search Process

Steps to initiate the satellite search after system connection.

Battery Capacity Indicators

Explains the meaning of different battery level symbols.

Satellite Selection and LNB Adjustment

Preprogrammed Satellite List

Lists available preprogrammed satellites with their orbital positions.

GPS Status and LNB Positioning

Guides LNB adjustment based on GPS location and display prompts.

Satellite Alignment and Calibration

LNB and Dish Position Adjustment

Instructions for adjusting LNB and dish position based on system prompts.

Calibration Process Overview

Details the calibration steps for elevation and azimuth.

Satellite Optimization and Module Removal

Signal Optimization Process

Explains the process of optimizing the signal after finding the satellite.

Control Module Removal

Instructions on removing the control module for safe storage.

Handling Satellite Search Errors

No GPS Found Scenarios

Describes actions when no GPS location is found.

Incorrect Satellite Detection

Explains what happens if an incorrect satellite is detected.

Control Module Removal Procedure

Module Release Mechanism

Details how to release the control module using the pin.

Control Module Charging

Charging Procedure

Steps for recharging the control module using the power adapter.

Battery Status During Charging

Explains display indicators during the charging process.

Menu Options

Language Settings

Instructions for selecting the user interface language.

Firmware Update Process

Guide on downloading and installing software updates via USB.

Park Position for Storage

System Storage Procedure

Instructions for setting the system to park position for storage.

Stop Button Operation

No Satellite Found Error

Error Messages

Software Update Errors

Details common errors during software update procedures.

Calibration and Signal Errors

Explains calibration failures and LNB signal issues.

Motor Electronics Error

Describes the 'E: OXBAFF' error related to motor electronics.

Troubleshooting and FAQs

Setup Level and Battery Status

Addresses system leveling requirements and low battery display.

External Socket and Cable Issues

Discusses signal quality problems related to external sockets or cables.

Software Update File Handling

Guidance on preparing and copying software update files to a USB stick.

Specifications

Warranty Conditions

Warranty Applicability and Claims

Outlines conditions for warranty coverage and claim procedures.

Limitations of Liability

Defines limitations on Travelvision BV's liability for use and defects.

Related product manuals