www.tractorsupply.com For customer support call 1-888-376-9601 8 2
l Never approach or span the cable when the winch is under load.
l When using the winch to move a load, place the vehicle transmission in neutral,
set vehicle brake, and chock all wheels. The vehicle engine should be running
during winch operation so that battery has fully electricity. Never use the winch
when there is a lack of voltage.
l Never disconnect free spool cultch when there is a load on the winch.
l Always stand clear of the cable, hook and winch. You should disconnect the clutch
first, then use the hand saver bar to hitch the hook to pull the cable.
l Inspect winch, cable, hooks and other accessories frequently. A frayed cable with
broken strands should be replaced immediately. Use heavy leather gloves when
handling the cable. Do not let the cable slide through your hands. Inspect the
cable before use. Mashed , pinched, frayed or kinked areas severely reduce the
load-carrying capability. Replacement cables must be re-spooled under 100lbs.
l To keep stated tensile, re-spool the cable around the drum tightly after operation.
l Do not operate winch when under the influence of drugs, alcohol or medication.
Always stay alert during operation.
l Wear eye protection and personal protective equipment while operating winch.
l For loads over 50% of rated line pull, the use of the pulley block/snatch block to
double the cable is recommended.
l Do not operate around potentially flammable liquids, gases, or debris. Sparks
may occur, resulting in the ignition of fire.
To Next Page
Loading...
